WIFI產品是目前市場上常見的一類產品，日本的電波法對這類產品有著嚴格的強制性要求，相關產品必須申請TELEC認證。這一認證類似于國內的SRRC認證，需要進行Japan Radio Law的型號核準(主要針對RF部分)， 針對不同的產品、頻段以及調制方式，TELEC所要求的測試項目和測試方法皆有所不同。環測威給您詳細介紹一下關于WIFI產品TELEC認證的測試項目。

        主要測試項目如下：

        1、頻率誤差測試(Frequency Error Measurement)

        2、耦合帶寬/載頻帶寬測試(Occupied Bandwidth and Spread-spectrumBandwidth / Factor)

        3、雜散騷擾測試(Unwanted Emission Intensity Measurement)

        4、天線功率誤差測試(Antenna Power Error Measurement)

        5、接收機雜散騷擾測試(Limitation of Collateral Emission of Receiver Measurement)

        6、EIRP天線功率測試(Transmission Antenna Gain (EIRP Antenna Power) Measurement)

        7、3dB波瓣帶寬測試(Transmission Radiation Angle Width (3dB Beamwidth) Measurement)

        8、干擾防護和載波偵聽(Radio Interference Prevention Capability & Carrier Sense Capability Measurement)

        TELEC認證需要提交的資料：

        (1)技術型號規格表(Technical Type Specification Form)

        (2)質量申明管理系統(Declaration of Quality Management System)

        (3)質量證書的控制批準方法或者ISO9001證書(Letter of Quality Control Confirmation MethodorManufacturer's ISO 9001 Certificate)

        (4)結構保護批準證書(Letter of Construction Protection Confirmation)

        (5)宣稱的額定功率(Rated Power Declaration)

        (6)天線報告(Antenna Report)

        (7)測試報告(Test Reports (including Test Results, Test Setup Photos and Examinations carried out))

        (8)標簽信息(Label Information(Label Location, Label content))

        (9)委托書/授權書(Power of Attorney / Authorization Letter)